NPTH to Copper (Drill)
Reports NPTHs
closer than pp_d2c or touching copper.
Internal ERF Name |
<Area>:npth2c |
Measurement Shape Measurement ID |
Segment Drill and clearance (in negative layer) or none (in positive layer) |
Layers Displayed |
Power and ground layer Drill layer piercing it |
Graphic |
|
Purpose |
A non-plated through hole should be kept away from copper surfaces since it is used for mounting and tooling by metal objects. |
Function |
Reports NPTHs closer than pp_d2c or touching copper. In negative power and ground layers, a violation is an NPTH whose clearance is not large enough. In positive power and ground layers, a violation is an NPTH too close to copper features. |
ERF Parameters |
pp_d2c |
ERF Variables |
take_npth_range |
Constraint |
Non-plated Hole Spacing |
Limitations |
