Lines (Size)

Reports width of lines representing conductor traces in signal layers.

Analysis Category	<Area>:line
Measurement Shape Measurement Value Measurement ID	Line Size Feature
Layers Displayed	Signal layer
Graphic
Function	Reports width of lines representing conductor traces in signal layers. Lines with attribute Copper Balancing or Copper Text are not reported. If a line is drawn (represented by two touching lines running beside each other), the compound width of the drawn line is reported. Lines are reported if both of these conditions are met: Line is narrower than max_line_width. One of these conditions is met: Line is longer than min_line_len. Length to width ratio is greater than len2width_ratio. If a line is partially covered by another feature, only the uncovered part is measured. ‘Lines’ is intended to report Active when the ‘Size’ test is selected.
ERF Parameters	pp_layer
ERF Variables	min_line_len max_line_width len2width_ratio report_lines_with_arcs = yes
Constraint	Feature Spacing
Limitations