Screen Name |
Parameter |
Description |
Categories Affected |
|---|---|---|---|
Operation Modes |
pp_operation_modes |
Single — Filters report by drills of same layer only. Cross — Filters report by drills of different layers only. (Both can be set.) |
All categories |
Check |
pp_layers_all |
Board — The options selected in Operation Modes (Single or Cross or both) are applied to the entire board. Affected — The options selected in Operation Modes (Single or Cross or both) are applied to the layers of pp_input_layers only. |
All categories |
Layer |
pp_input_layer |
The layer on which to run the check. Ignored when pp_layer_all=Board. |
All categories |
First El Type: Via |
pp_1_element |
Controls whether a measurement is made from a via. (yes or no) |
Via to Via Via to PTH Via to NPTH Via to Rout |
First El Type: PTH |
pp_3_element |
Controls whether a measurement is made from a plated thru-hole. (yes or no) |
PTH to PTH PTH to NPTH PTH to Rout |
First El Type: NPTH |
pp_5_element |
Controls whether a measurement is made from a non-plated thru-hole. (yes or no) |
NPTH to NPTH NPTH to Rout NPTH to Rout_% |
Second Element Type (for First-El.-Type = Via) |
pp_2_element |
If pp_1_element is selected, one or more entities to which to measure from a via:
|
Via to Via Via to PTH Via to NPTH Via to Rout |
Second Element Type (for First-El.-Type = PTH) |
pp_4_element |
If pp_3_element is selected, one or more entities to which to measure from a plated thru-hole:
|
PTH to PTH PTH to NPTH PTH to Rout |
Second Element Type (for First-El.-Type = NPTH) |
pp_6_element |
If pp_5_element is selected, one or more entities to which to measure from a non-plated thru-hole:
|
NPTH to NPTH NPTH to Rout NPTH to Rout_% |